1. |
Disconnect the rear seat cushion heater connector (A) from the
trunk inner side.
|
2. |
After loosening the mounting bolts and then push it up and remove
the rear seat cushion assembly (B).
|
3. |
Install in the reverse order of removal.
|
(4Door, 2Door) |
1. |
Remove the rear seat cushion assembly.
|
2. |
Fold the rear seat back assembly.
|
3. |
After loosening the mounting bolts, then remove the rear seat
back assembly (A).
|
4. |
Install in the reverse order of removal.
|
(5Door) |
1. |
Remove the rear seat cushion assembly.
|
2. |
Using a flat-tip screwdriver, push the locking pin (B) and then
remove the mini buckle (A).
|
3. |
Fold the rear seat back assembly.
|
4. |
After loosening the mounting bolts, then remove the rear seat
back assembly (A).
|
5. |
Install in the reverse order of removal.
|
Seat Heater (Air Ventilation) Circuit Diagram
...
Fuel Tank Pressure Sensor (FTPS) Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission
control system and is installed on the fuel tank, the fuel pump, or the canister.
It checks the purge control solen ...
Warning And Caution Labels
1. Fan caution
2. Radiator cap caution
3. Battery caution
Battery Caution Label
Warning / Caution Label (Cont'd)
A.
Keep lighted cigare ...