Kia Forte: Rear Back Armrest Replacement
•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Fold the rear seat back assembly [LH].
|
2. |
Remove the rear back armrest cap (A).
|
3. |
After loosening the mounting bolt, then remove the rear back armerst
(B).
|
4. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
(4Door, 2Door)
1. Rear seat latch assembly
(5Door)
1. Rear seat latch
...
See also:
Installation
1.
Install in the reverse order of removal.
2.
Adjust the ignition lock switch.
(1)
In state of full stro ...
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Starter Removal
1.
Disconnect the battery negative terminal.
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - &quo ...