(4Door, 5Door) |
|
1. |
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
|
2. |
After loosening the mounting bolt, then remove the front seat
belt upper anchor (A).
|
3. |
After disconnecting the pretensioner connector lock pin, remove
the front seat belt pretensioner connector (A), loosen the mounting
bolt, then remove the front seat belt pretensioner (B).
|
4. |
Install in the reverse order of removal.
|
Rear Oil Seal Installation
1.
Install a new rear oil seal.
(1)
Apply engine oil on the edge of new oil seal.
(2)
...
Passenger Airbag (PAB) Module
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB.
...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the parking lights when the driver removes
the ignition key and opens the driver- ...