Kia Optima Manuals

Kia Forte: Rear Center Seat Belt Retractor Replacement - Rear Seat Belt - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Center Seat Belt Retractor Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Center Seat Belt Retractor Replacement

(4Door)
  
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim")
2.
After loosening the mounting bolt, then remove the rear center seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
  
•
Replace any damaged clips.
(5Door)
  
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear seat back cover [RH].
(Refer to Rear Seat - "Rear Seat Back Cover")
2.
After loosening the mounting nut, then remove the rear center seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
  
•
Replace any damaged clips.
Rear Center Seat Belt Retractor Component Location
(4Door) 1. Rear center seat belt retractor (5Door) 1. Rear center seat belt retractor ...

Rear Seat Belt Buckle Component Location
(4Door) 1. Rear seat belt buckle [LH] 2. Rear seat belt buckle [RH] (5Door) 1. Rear seat belt buckle [LH] 2. Rear seat belt bu ...

See also:

Components Location
[LEV2 Type] [SULEV Type] 1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Caniste ...

Special Service Tools
Tool (Number and Name) Illustration Use 09200-3N000 Engine support fixture (Beam) Removal and installation of the transaxle.Use this adap ...

Hazard Lamp Switch Installation
1. Install the hazard switch. 2. Install the center fascia panel. ...

Categories


Copyright © www.kifomanual.com 2014-2024