|
1. |
Disconncet the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the center fascia garnish
(A).
|
3. |
Using a screwdriver or remover, remove the center fascia panel
(A).
|
4. |
Remove the center fascia panel after disconnecting the hazard
switch connector (A).
|
5. |
Remove the audio head unit (A) after loosening the mounting screws
(4EA).
|
6. |
Disconnect the connectors and cable (A) from the audio head unit.
|
Power Window Motor Circuit Diagram
...
Line Pressure Control Solenoid Valve Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Alternator On-vehicle Inpection
•
Check that the battery cables are connected to the correct
terminals.
...