1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
3. |
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
|
4. |
Remove the steering wheel cover (A) after loosening the screw.
|
5. |
Disconnect the steering heater connectors (A).
|
6. |
Remove the steering remote control switch assembly after loosening
the mounting screws (4EA).
|
7. |
Disconnect the switch connectors (A).
|
8. |
Remove the remote control switchs (A) after loosening the mounting
screws.
|
Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front windshield glass.
The auto defogging sensorr senses moisture on the windshild. The air conditioner
control module receives the signal from ...
Tail Gate Assembly Component Location
(5Door)
1. Tail gate assembly
...