Kia Forte: Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground
the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace
it.
Horn Relay Inspection
| 1. |
Remove the horn relay (A) from the engine room relay box.
|
| 2. |
There should be continuity between the No.30 and No.87 terminals
when power and ground are connected to the No.85 and No.86 terminals.
|
| 3. |
There should be no continuity between the No.30 and No.87 terminals
when power is disconnected.
|
Component Location
1. Horn switch
2. Horn relay (Engine room compartment)
3. Clock spring
4. Horn
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
...
See also:
Components Location
1. AVN (A/V & Navigation head unit)
2. Tweeter speaker
3. Glass antenna amp (Radio)
4. Front door speaker
5. Rear door speaker
6. Antenna feeder cable jiont
7. Ant ...
Rear Seat Back Cover Replacement
(4Door, 2Door)
[LH]
•
Put on gloves to protect your hands.
...
Special Service Tools
Tool(Number and Name)
Illustration
Use
Deployment tool
0957A-34100A
Airbag deployment tool.
Deployment adapter
0957A-3Q100
...
Copyright © www.kifomanual.com 2014-2024