Kia Forte: AVN System

Installation

1. Install the horn and connect the horn connector. 2. Reassemble the front bumper cover. ...

Specifications

AVN Head Unit Item Specification Power supply DC 14.4V negative ground Load Impedance 4ohm × 4 Tuning type PLL SYNTH ...

See also:

Component Location
1. Instrument cluster assembly 2. Seat belt switch 3. Vehicle speed sensor 4. Engine coolant temperature sender 5. Oil pressure switch 6. Brake fluid level warning switch ...

Accelerator Position Sensor (APS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

Description
The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system ai ...