1. |
Connect the DLC cable of GDS to the data link connector in driver
side crash pad lower panel, turn the power on GDS.
|
2. |
Select the vehicle model and then do "Smart key code saving".
|
3. |
After selecting "Smart key teaching" menu, push "Enter" key, then
the screen will be shown as below.
|
4. |
After pushing the SSB with the teaching key, press "OK" button.
|
5. |
Input the "Pin code" for first key teaching.
|
6. |
Confirm the message "First key teaching completed".
|
7. |
Confirm the message "Second key teaching completed".
|
8. |
Then the screen will be shown as below when key teaching process
is completed.
|
Relay Box (Passenger Compartment) Components
...
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...
SS-A Solenoid Valve(ON/OFF) Description
Shift Solenoid(SS) Valve-A is attached to the valve body and is an on/off
solenoid valve that is used to change gears. Shift Solenoid(SS) Valve-A is installed
at valve body.
...