1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the heater & A/C control unit.
(Refer to Heating,Ventilation, Air Conditioning - "Heater & A/C
controller unit(Manual))
(Refer to Heating,Ventilation, Air Conditioning - "Heater & A/C
controller unit(DATC))
|
3. |
Remove the floor console assembly.
|
4. |
Remove the center lower cover (A) after loosening the screws.
|
5. |
Remove the BCM unit. (in the order as below)
|
ESC OFF Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side switch assembly (A).
3.
D ...
AGM Battery Description
AGM battery is used for especially heavy load on the vehicle network depending
on equipment and requirements. AGM stands for Absorbent Glass Material Battery;
that is absorbent glass fibre fl ...
Power Seat Control Switch Installation
1.
Connect the connector and install the power seat control switch.
2.
Install the seat cover.
...