System Outline |
1. |
IGN2
IGN switch input is determined by Local switch “IGN2”.
|
2. |
SEAT MANUAL switch : SEAT Input
|
3. |
SEAT position Sensor (pulse Signal)
Sensing movement amount of Slide, Recline, Front rear height,
and Rear right height motor
|
4. |
Dr Door switch
Sensing that drive door opens
|
5. |
Speed
This signal is received for sensing vehicle speed by BCM
|
6. |
IMS switch
|
7. |
CAN Communication LINE
|
1. |
Input switch - 40ms delay
SLIDE, RECLINE, Front rear height, rear right HEIGHT switch
“P” Position switch, SPEED, KEY IN, LOCAL KEY IN switch, DR DOOR
switch, IGN2 switch
|
2. |
IGN switch input is determined by Local switch “IGN2.
|
1. |
±10%, for TIME without error indication
±50ms, for TIME not exceeding 500ms
|
2. |
Indicated time in each function does not include Time of controlling
CHATTERING started from changing point of rr input.
|
Refrigerant Recovery
Use only service equipment that is U.L-listed and is certified to meet
the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning
system.
...
Garment Hook Components
(2Door)
1. Garment hook
...
Overhead Console Lamp Inspection
1.
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
...