Power Seat Motor |
1. |
Remove the seat and all motor connectors.
A : Slide motor
B : Height motor
C : Tilt motor
D : Recline motor
E : Lumbar support motor
|
2. |
With the battery connected directly to the motor terminals, check
if the motors run smoothly.
|
3. |
Reverse the connections and check that the motor rotates in reverse.
|
4. |
If there is an abnormality, replace the motors.
|
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, this number will enable an authorized Kia dealer to duplicate
the keys easily. Remove the k ...
Tire pressure monitoring system
...
Front Stabilizer Bar Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...