1. |
Install the switchs and connect the switch connectors.
|
2. |
Insatll the floor console assembly.
|
3. |
Connect the negative (-) battery terminal.
|
1. |
Install the power window switch and connect the power window switch
connector.
|
2. |
Install the rear door trim panel.
|
3. |
Connect the negative (-) battery terminal.
|
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...
Power Door Lock Switch Removal
Driver Door Lock Switch
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front ...
Fuel Pump Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery
cable.
2.
Remove the fuel pump assembly.
...