Kia Forte: Air Ventilation Seat Unit Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Unit Removal
Cushion Blower
| 1. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
|
| 2. |
Remove the cushion blower (A) after loosening the mounting screws
(3EA) and disconnecting the blower connector.
|
Back Blower
| 1. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
|
| 2. |
Remove the front seat back cover.
(Refer to Body - "Front Seat Back Cover")
|
| 3. |
Remove the back blower (A) after loosening the mounting screws
(2EA) and disconnecting the blower connector.
|
Air Ventilation Unit
| 1. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
|
| 2. |
Remove the air ventilation unit (A) after loosening the mounting
screws (2EA) and disconnecting the connector.
[Driver]
[Passenger]
|
Air Ventilation Seat Unit Description
The ventilated seat system uses a Push method to cool the seat. A blower
mounted in the seat generates the cool air, which then travels through ducts
to the seat back and cushion.
...
Air Ventilation Seat Unit Installation
Cushion Blower
1.
Install the cushion blower under the bottom of the seat.
2.
Install the front seat aseembly.
Back Blower
...
See also:
Climate Control Air Filter Description
The climate control air filter is located in the blower unit. It eliminates
foreign materials and odor. The particle filter performs a role as an odor filter
as well as a conventional dust fi ...
Troubleshooting
Symptom
Suspect area
Engine will not start or hard to start
Vapor hose damaged or disconnected
Engine hard to start
Malfunction of the Purge C ...
Yaw-rate and Lateral G Sensor
When the vehicle is turning with respect to a vertical axis the yaw rate
sensor detects the yaw rate electronically by the vibration change of plate
fork inside the yaw rate sensor.
If ya ...
Copyright © www.kifomanual.com 2014-2024