1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
3. |
Disconnect the power window switch module connectors (A) from
the door trim.
|
4. |
Remove the power window switch (A) after loosening 4 screws.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
3. |
Disconnect the power window switch module connector from the door
trim.
|
4. |
Remove the power window switch (A) after loosening the mounting
screws.
|
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignitio ...
IMS Control Switch Circuit diagram
...
Automatic transaxle operation
The automatic transaxle has 6 forward speeds and one reverse speed. The individual
speeds are selected automatically, depending on the position of the shift lever.
✽ NOTICE
The first few ...