1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the front door quadrant inner cover (A).
|
3. |
Disconnect the outside rear view mirror connector (A).
|
4. |
Verify that the mirror operates properly as shown in the table.
[Actuator]
Mirror Heater
Turn Signal Lamp
Puddle Lamp
Folding Mirror
|
Crankshaft Position Sensor (CKPS) Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop ...
Auto Head Lamp Leveling Unit Inspection
1.
Ignition "ON".
2.
Turn on the head lamp switch.
3.
Check for operation. If the aim of the head lam ...
Blower Unit Components
1. Intake Seal
2. Intake Upper Case
3. Intake Actuator
4. Air Filter
5. Air Filter Cover
6. Intake Door Assembly
7. Intake Lower Case
8. NVH Pad
9. Blower Up ...