Kia Forte: Rear Glass Defogger Switch Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Rear Glass Defogger / Rear Glass Defogger Switch Inspection
| 1. |
The rear glass defogger switch inputs can be checked using the
GDS.
|
| 2. |
To check the input value of rear glass defogger switch, select
option "Body Control Module".
|
| 3. |
To consult the present input/output value of BCM, "Current DATA".
It provides information of BCM input/output conditions of smart junction
box.
|
| 4. |
To check the input value of rear glass defogger switch in force
mode, select option "Actuation Test of smart junction box".
|
Rear Glass Defogger Printed Heater Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line. Apply finger pressure on th ...
Rear Glass Defogger Switch Replacement
1.
Remove the center fascia panel.
(Refer to Body - "Center Fascia Panel")
2.
Remove the cluster fascia panel.
(Refer ...
See also:
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Connect the start/stop button connector.
3.
Install the cluster fascia pan ...
Replacement
•
Put on gloves to protect your hands.
&n ...
Side Airbag (SAB) Module
The Side Airbags (SAB) are installed inside the front seat and protects
the driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of side airbag by using Si ...
Copyright © www.kifomanual.com 2014-2024