1. |
Remove the center fascia panel.
(Refer to Body - "Center Fascia Panel")
|
2. |
Remove the cluster fascia panel.
(Refer to Body - "Cluster Fascia Panel")
|
3. |
After loosening the mounting screws, remove the drive airvent
duct assembly (A).
|
4. |
After loosening the mounting screws, disconnect the connector
(A), and then remove the center fascia cover (B).
|
5. |
Disconnect the clock switch connector (A).
|
6. |
After loosening the mounting screws, remove the center airvent
duct assembly [RH] (A).
|
7. |
Remove the in-car hose (A).
|
8. |
Disconnect the in-car sensor connector (B).
|
9. |
After loosening the mounting screws, remove the A/C & heater controller
(A).
|
10. |
Disconnect the A/C & heater controller connector (A).
|
11. |
Install in the reverse order of removal.
|
CVVT Oil Control Valve (OCV) Installation
•
Install the component with the specified torques.
•
...
Component Location
1. Fender assembly
...
Operation
Function Of Safety Power Window
When all door (Front, Rear) power window auto-up switch is operated, safety
function is activated.
1.
Safety function condition
...