1. |
Install the multifunction switch.
|
2. |
Install the clock spring.
|
3. |
Install the steering column upper and lower shrouds.
|
4. |
Install the steering wheel.
|
Oil Pump Unit (OPU) Removal
1.
Remove the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - “Crash Pad”)
...
26 Brake Control Solenoid Valve(26/B_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
TPMS Sensor
1.
Storage State
Sensors are in this state when they first arrive at dealership.
This state is entered by LF request/command only.
Either LF request ...