1. |
Remove the connector (A) from the wiper motor.
|
2. |
Attach the positive (+) lead from the battery to terminal 2 and
the negative (-) lead to terminal 5.
|
3. |
Check that the motor operates at low or high speed as below table.
|
Heated Oxygen Sensor (HO2S) Removal
[SULEV]
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the connector (A), and th ...
Outside Rear View Mirror Component Location
(4Door, 5Door)
1. Outside rear view mirror
(2Door)
1. Outside rear view mirror
...
Cruise Control Switch Inspection
[Measuring Resistance]
1.
Check for resistance between terminals in each switch position.
Function
switch
Connector
termi ...