1. |
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
|
2. |
Connect positive (+) battery cables to terminal 2 and negative
(-) battery cables to terminal 1 respectively.
|
3. |
Check that the motor operates normally and the washer motor runs
and water sprays from the front nozzles.
|
4. |
If they are abnormal, replace the washer motor.
|
Relay Box (Engine Compartment) Inspection
Power Relay Test (Type A)
-
Do not use pliers.
-
...
Oil Pan Removal
1.
Remove the under covers.
2.
Drain engine oil.
3.
Remove the oil pan (A).
(1)
...
Rearview camera
The rear view camera will activate with the ignition switch on and the shift
lever in the R (Reverse) position.
Note- during initial start up, system may not display instantly due to the audio
...