Kia Forte: Hands Free Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Hands Free System / Hands Free Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
| 3. |
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
|
| 4. |
Remove the steering wheel cover (A) after loosening the screw.
|
| 5. |
Disconnect the steering heater connectors (A).
|
| 6. |
Remove the steering remote control switch assembly after loosening
the mounting screws (4EA).
|
| 7. |
Disconnect the switch connectors (A).
|
| 8. |
Remove the remote control switchs (A) after loosening the mounting
screws.
|
Hands Free Switch Inspection
1.
Check the hands free remote control switch for resistance between
terminals in each switch position.
Switch
Connector
...
Hands Free Switch Installation
1.
Reassemble the steering wheel remote control switch after connecting
the connector.
2.
Reassemble the driver airbag module.
...
See also:
Replacement
1.
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
Tightening torque :
22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 ...
Power Window Switch Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - ...
Fuel Tank Pressure Sensor (FTPS) Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Copyright © www.kifomanual.com 2014-2024