If there are any regulations pertinent to the aiming of head lamps
in the area where the vehicle is to be used, adjust so as to meet those
requirements.
|
1. |
Inflate the tires to the specified pressure and remove any loads
from the vehicle except the driver, spare tire, and tools.
|
2. |
The vehicle should be placed on a flat floor.
|
3. |
Draw vertical lines (Vertical lines passing through respective
head lamp centers) on the screen.
|
4. |
With the head lamp and battery in normal condition, aim the head
lamps so the brightest portion falls on the vertical lines.
A : Vertical(Low)
|
1. |
Head Lamp (Low beam)
|
2. |
Turn the front fog lamp on without the driver aboard.
The cut-off line should be projected in the allowable range (shaded
region)
|
Dynamic Damper Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to ...
Daytime running light
Daytime Running Lights (DRL) can make it easier for others to see the front of
your vehicle during the day.
DRL can be helpful in many different driving conditions, and it is especially
helpful aft ...
Evaporator Core Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater -"Heater Unit")
...