Kia Forte: Room Lamp Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Room Lamp Installation
Room Lamp
| 1. |
Reconnect the connector.
|
| 2. |
Install the room lamp assembly.
|
| 3. |
Install the lens.
|
Vanity Lamp
| 1. |
Reconnect the vanity lamp connector.
|
| 2. |
Install the vanity lamp.
|
Room Lamp Removal
Room Lamp
1.
Disconnect the negative(-) battery terminal.
2.
Carefully remove the lamp lens (A) from the room lamp with a flat-tip
scre ...
Overhead Console Lamp Inspection
1.
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
...
See also:
CVVT & Camshaft Installation
1.
Install the CVVT assembly (A) to the camshaft.
Tightening torque :
64.7 ~ 76.5 N.m (6.6 ~ 7.8 kgf.m, 47.7 ~ 56.4 lb-ft)
...
ETC (Electronic Throttle Control) System Installation
•
Install the component with the specified torques.
•
...
Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54)
Current value(mA)
...
Copyright © www.kifomanual.com 2014-2024