Kia Forte: Overhead Console Lamp Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Overhead Console Lamp Installation
| 1. |
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
|
| 2. |
Install the lens after tightening 2 screws.
|
Overhead Console Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen 2 screws holding the overhead console (A).
3.
...
License Lamp Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lens (A) after loosening the mounting screws.
3.
...
See also:
Installation
1.
Install in the reverse order of removal.
2.
Adjust the clutch switch.
(1)
Adjust the gab by rotating t ...
Valve Body Components Location
1. Pressure Controle Valve(PCV) adjust screw
2. Solenoid valve
3. Oil temperature sensor
4. Accumulator
5. Low & Reverse Brake(LR/B) pressure flow hole
6. Underdrive ...
Crankshaft Damper Pulley Removal and Installation
1.
Remove the RH front wheel.
2.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
3.
...
Copyright © www.kifomanual.com 2014-2024