Kia Forte: License Lamp Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / License Lamp Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the lens (A) after loosening the mounting screws.
|
| 3. |
Remove the license lamp (B) after disconnecting the connector
(A).
|
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
2.
Install the lens after tightening ...
License Lamp Installation
1.
Connect the connector.
2.
Install the license lamp.
...
See also:
Transaxle Oil Temperature Sensor Specifications
▷ Type: Negative Thermal Coefficient(NTC) Type
Temp.[(°C)°F]
Resistance (kΩ)
(-40)-40
48.1
(-20)-4.0
15.6
(0)32.0
...
Starter Removal
1.
Disconnect the battery negative (-) cable.
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - &qu ...
Torque Converter Control Solenoid Valve (T/CON_VFS) Circuit Diagram
...
Copyright © www.kifomanual.com 2014-2024