1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the lighting switch of the multi-function switch.
(Refer to Multifunction Switch)
|
3. |
With the front fog lamp switch, make sure that continuity exists
between the terminals below.
If continuity is not as specified, replace the multi-function
switch.
Front Fog Lamp
|
Inspection
•
Frequent inhalation of brake pad dust, regardless of material
composition, could be ha ...
ESC Control Module Removal
1.
Turn the ignition switch OFF.
2.
Pull up the lock of the HECU connector (A) , then disconnect the
connector.
...
Dynamic Damper Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to ...