Kia Forte: Auto Head Lamp Leveling Unit Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Auto Head Lamp Leveling Unit Inspection
| 1. |
Ignition "ON".
|
| 2. |
Turn on the head lamp switch.
|
| 3. |
Check for operation. If the aim of the head lamps changes smoothly
when the head lamp leveling switch is turned.
|
| 4. |
If the operation does not work well, inspect the connector and
terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them as necessary,
and recheck the system.
If the terminals look OK, go to step 5.
|
| 5. |
Substitute with a known-good head lamp assembly and check for
proper operation.
|
Auto Head Lamp Leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Sensor angle change.
3.
...
Auto Head Lamp Leveling Unit Removal
1.
Remove the head lamp leveling unit connector (A).
2.
Remove the head lamp leveling unit (B) after loosening the mounting
bolts.
...
See also:
Relay Box (Engine Compartment) Components
...
Specification
Item
Type
Watt (W)
Head lamp
Low
STD
H11
55
HID
D8S
25
High
H1
55
Turn ...
Line Pressure Control Solenoid Valve Specifications
Direct control VFS[Line Pressure]
▷ Control type : Normal high type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current val ...
Copyright © www.kifomanual.com 2014-2024