Kia Forte: Auto Head Lamp Leveling Unit Removal - Auto Head Lamp Leveling Device - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Auto Head Lamp Leveling Unit Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Auto Head Lamp Leveling Unit Removal

1.
Remove the head lamp leveling unit connector (A).
2.
Remove the head lamp leveling unit (B) after loosening the mounting bolts.

  
Pull the sensor linkage (A) to the direction of an arrow.

Auto Head Lamp Leveling Unit Inspection
1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check for operation. If the aim of the head lam ...

Auto Head Lamp Leveling Unit Installation
1. Install the head lamp leveling unit. 2. Reconnect the head lamp leveling unit connector. ...

See also:

Front Driveshaft Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Variant coding
After replacing the SRSCM with a new unit, the “Variant Coding” procedure must be performed.    1. ...

CVVT (Continuously Variable Valve Timing) System Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force generated by the engine oil supplied to the advance or retard chamber in accordance with the CVVT oil control valve con ...

Copyright © www.kifomanual.com 2014-2024