Kia Forte: Start/Stop Button Installation - Button Engine Start System - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Start/Stop Button Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button Installation

1.
Install the start/stop button.
2.
Connect the start/stop button connector.
3.
Install the cluster fascia panel and center garnish.
Start/Stop Button Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center garnish [LH] (A). ...

Ignition Switch Assembly
...

See also:

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

Flat tire
For safe operation, carefully read and follow the instructions in this manual before use. (1) Compressor (2) Sealant bottle The Tire Mobility Kit is a temporary fix to the tire and the tire sh ...

Brake Booster Vacuum Pressure Sensor Circuit Diagram
...

Copyright © www.kifomanual.com 2014-2024