1. |
Install the key lock cylinder.
|
2. |
Install the key warning switch and key Illumination.
|
3. |
Install the key warning/immobilizer connector.
|
4. |
Connect the ignition switch connector after Install the ignition
switch.
|
5. |
Install the wiper switch.
|
6. |
Install the steering column shrouds.
|
7. |
Install the driver crash pad lower panel.
|
Oil Pump Components
1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10. Bo ...
Rear Wheel House Trim Replacement
(4Door)
•
Put on gloves to protect your hands.
...
Inspection
Front brake disc thickness check
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
...