1. |
Disconnect the ignition switch connector (B) and key warning switch
connector (A) from the steering column.
|
2. |
Check for continuity between the terminals.
|
3. |
If continuity is not specified, replace the switch.
|
Auto Defogging Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
...
Seat Belt Pretensioner (BPT)
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce ...
Parking Brake Lever Adjustment
Parking Brake Lever Stroke Adjustment
1.
Remove the floor console.
(Refer to Body group - "Floor console")
2.
Apply the b ...