Kia Forte: Component Location
| [Engine Room] |
| 1. Receiver Drier 2. Condenser 3. Ambient Temperature Sensor 4. Compressor 5. Discharge Hose |
6. Suction & Liquid Tube Assembly 7. Service Port (High Pressure) 8. Service Port (Low Pressure) 9. A/C Pressure Transducer (APT) 10. Expansion Valve |
| [Interior] |
| 1. Auto Defogging Sensor 2. Photo Sensor 3. Heater & A/C Controller (Manaul) 4. Heater & A/C Controller (DATC) |
5. Incar Sensor 6. Heater & Blower Unit 7. Evaporator Temperature Sensor 8. Cluster Ionizer |
Refrigerant Recovery
Use only service equipment that is U.L-listed and is certified to meet
the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning
system.
...
Compressor Oil Specification
1.
The R-134a system requires synthetic compressor oil (PAG) whereas
the R-12 system requires mineral compressor oil. The two oils must never
be mixed.
...
See also:
Oil Pan Removal
1.
Remove the under covers.
2.
Drain engine oil.
3.
Remove the oil pan (A).
(1)
...
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front d ...
Variable Intake Solenoid (VIS) Valve Circuit Diagram
(M/T)
(A/T)
...
Copyright © www.kifomanual.com 2014-2024