1. |
Remove the front right side tire.
|
2. |
Remove the engine room side cover (A).
|
3. |
Remove the wheel guard from the wheel house.
|
4. |
Loosen the drive belt.
(Refer to Engine Mechanical System - "Drive Belt")
|
5. |
Remove the center bolt (A) while holding the disc & hub assembly
bolt remover (09977-3R000).
|
6. |
Remove the disc & hub assembly (A) and shim (gap washer). Be careful
not to lose the shims.
|
7. |
Remove the pulley (B) after removing the snap ring (A) with snap
ring pilers.
|
8. |
Reassemble the compressor clutch in the reverse order of disassembly.
|
Special Service Tools
Tool Name / Number
Illustration
Description
Steering wheel puller
09561-11001
Remove the steering wheel
...
Rear Wheel Guard Replacement
•
Put on gloves to protect your hands.
&nb ...
Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector in driver
side crash pad lower panel, turn the power on GDS.
...