1. |
Recover the refrigerant with a recovery/ recycling/ charging station.
|
2. |
Disconnect the negative (-) battery terminal.
|
3. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
|
4. |
Remove the discharge line (A) and liquid line (B) from the condenser.
|
5. |
Remove the air guard (A).
|
6. |
Remove the intake air duct (A).
|
7. |
Remove the radiator upper bracket (B) loosening the radiator mounting
bolts (A).
|
8. |
Loosen the mounting bolts and then remove the radiator upper bracket
(A).
|
9. |
Remove the condenser (A) from radiator.
|
10. |
Install in the reverse order of removal.
|
Spark Plug Installation
1.
Install in the reverse order of removal.
Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)
...
Power Door Lock Actuators Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front d ...
Operating door locks from outside the vehicle
Turn the key toward the rear of the vehicle to unlock and toward the front
of the vehicle to lock.
If you lock/unlock the door with a key, all vehicle doors will lock/unlock
automatically ...