1. |
Remove the condenser, and then remove the bottom cap (B) with
a L wrench (A) from the condenser.
|
2. |
Remove the receiver-drier (A) from condenser using a long nose
plier. Check for crumbled receiver-drier and clogged bottom cap filter.
|
3. |
Apply air conditioning compressor oil along the O-rings and threads
of the new bottom cap.
|
4. |
Insert a new receiver-drier into the receiver drier tank. The
receiver-drier must be sealed in vacuum before it is exposed to air
for use.
|
5. |
Install the new bottom cap to the condenser.
|
Crankshaft Inspection
1.
Check the crankshaft bearing oil clearance.
(1)
To check main bearing-to-journal oil clearance, remove
the lower crankcase and lo ...
Air Ventilation Seat Unit Removal
Cushion Blower
1.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
2.
Remove the cushion blower (A) ...
Purge Control Solenoid Valve (PCSV) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV termi ...