1. |
Turn the ignition switch OFF.
|
2. |
Disconnect evaporator temperature sensor.
|
3. |
Using the multi-tester, measure resistance between terminal "1"
and "2" of the evaporator temperature sensor.
|
4. |
Connect the evaporator temperature sensor connector.
|
5. |
Run the engine and turn the A/C switch ON, then measure the voltage
between the terminals of the harness connector.
Specification
|
Sunroof Assembly Replacement
•
Put on glove to protect your hands.
&nb ...
Parking Brake Cable Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
...
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the e ...