1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the evaporator temperature sensor connector (A).
|
3. |
Remove the evaporator temperature sensor (B) by pulling it out
after rotating it 90° in a counterclockwise direction.
|
4. |
Install in the reverse order of removal.
|
Component Location
1. Instrument cluster assembly
2. Seat belt switch
3. Vehicle speed sensor
4. Engine coolant temperature sender
5. Oil pressure switch
6. Brake fluid level warning switch
...
Temperature Control Actuator Replacement
[Driver's side]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body -& ...
Engine overheat
If your temperature gauge indicates overheating, you will experience a loss of
power, or hear loud pinging or knocking, the engine is probably too hot. If this
happens, you should: 1.Pull off the ro ...