Kia Forte: In-car Sensor (DATC only) Description

An in-car air temperature sensor is located in the crash pad lower panel.

The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to the heater control unit and according to this signal the control unit regulates the in-car temperature to the intended value.

Evaporator Temperature Sensor Replacement

1. Disconnect the negative (-) battery terminal. 2. Disconnect the evaporator temperature sensor connector (A). 3. ...

In-car Sensor (DATC only) Inspection

1. Turn the ignition switch ON. 2. Blow air with changing temperature into the in-car sensor air inlet. Measure the sensor resistance betwe ...

See also:

Auto Head Lamp Leveling Unit Circuit Diagram
...

Installation
1. Install the boot (A). 2. Install the clip to the clutch release fork. 3. Apply to grease in location ...

Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn Relay Inspec ...