1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the heater and blower assembly.
(Refer to Heater -"Heater Unit")
|
3. |
Remove the heater core cover (A) after loosening the mounting
screws.
|
4. |
Pull out the heater core (A) from the heater unit.
|
5. |
Install in the reverse order of removal.
|
Knock Sensor (KS) Specification
Item
Specification
Capacitance (pF)
850 ~ 1,150
...
Fuel Filter Removal
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel
sender conn ...
Knock Sensor (KS) Circuit Diagram
(M/T)
(A/T)
...