1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the temperature control actuator connector.
|
3. |
Verify that the temperature control actuator operates to the cool
position when connecting 12V to terminal 3 and grounding terminal 7.
Verify that the temperature control actuator operates to the warm
position when connected in reverse.
|
4. |
Connect the temperature control actuator connector.
|
5. |
Turn the ignition switch ON.
|
6. |
Check the voltage between terminal 6 and 7.
Specification
It will feedback the current position of the actuator to the controls.
|
7. |
If the measured voltage is not within specification, substitute
with a known-good temperature control actuator and check for proper
operation.
|
8. |
Replace the temperature control actuator if it is proved that
there is a problem with it.
|
Components
1. Intake camshaft
2. Exhaust camshaft
3. Intake CVVT assembly
4. Exhaust CVVT assembly
5. Timing chain
6. Timing chain tensioner arm
7. Timing chain tensioner
8. T ...
Starter Reassembly
1.
Reassemble in the reverse order of disassembly.
...
Console Armrest Component Location
1. Console armrest
...