Kia Forte: Mode Control Actuator Description

The mode control actuator is located at the heater unit.

It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.

Temperature Control Actuator Replacement

[Driver's side] 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body -& ...

Mode Control Actuator Inspection

1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode con ...

See also:

26 Brake Control Solenoid Valve(26/B_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Description
The 6-speed automatic transaxle consists of an Overdrive Clutch (OD/C), a One-Way Clutch (OWC), a Lower & Reverse Brake (LR/B), an Underdrive Brake (UD/B), a 26 brake (26/B), and a 35R Cl ...

Variable Intake Solenoid (VIS) Valve Installation
   • Install the component with the specified torques. • ...