1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
|
3. |
Remove the driver side shower duct after loosening the screw.
|
4. |
Disconnect the PTC heater connector (A).
|
5. |
Remove the PTC heater core (A) after loosening the PTC heater
mounting screws.
|
6. |
Install in the reverse order of removal.
|
Schematic Diagrams
MDPS Circuit Diagram
Harness Connector
Connector
Pin no
Pin name
Battery
1
Battery +
2
Battery -
Vehicl ...
Removal
1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the clutch cover bolts. ...
Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...