Kia Forte: Blower Unit Component Location

Blower

...

Blower Unit Components

1. Intake Seal 2. Intake Upper Case 3. Intake Actuator 4. Air Filter 5. Air Filter Cover 6. Intake Door Assembly 7. Intake Lower Case 8. NVH Pad 9. Blower Up ...

See also:

Purge Control Solenoid Valve (PCSV) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the purge control solenoid valve connector (A) ...

Condenser Inspection
1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdrive ...

Electric Oil Pump Circuit Diagram
...