Kia Forte: Blower Unit Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Unit Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
|
| 3. |
Seperate the blower unit from the heater unit after loosening
the screws.
|
| 4. |
Install in the reverse order of removal.
|
Blower Unit Components
1. Intake Seal
2. Intake Upper Case
3. Intake Actuator
4. Air Filter
5. Air Filter Cover
6. Intake Door Assembly
7. Intake Lower Case
8. NVH Pad
9. Blower Up ...
Blower Motor Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor voltage does not operate well, substitute
...
See also:
Weight Classification System (WCS)
WCS is intended to detect the occupant’s physique in order to determine
whether the passenger airbag should be suppressed or deployed. WCS classifies
the front passenger side seat by measurin ...
Engine compartment
1. Engine oil filler cap
2. Engine oil dipstick
3. Brake/clutch fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshiel ...
Components Location
[SULEV Type]
[LEV2 Type]
1. Fuel tank
2. Fuel pump
3. Fuel filter
4. Fuel pressure regulator
5. Canister
6. Fuel tank air filter
7. Fuel tank ...
Copyright © www.kifomanual.com 2014-2024