1. |
Turn the ignition switch ON.
|
2. |
Manually operate the control switch and measure the voltage of
the blower motor.
|
3. |
Select the control switch to raise the voltage until high speed.
Specification
* Manual Fan Speed : 3.4V ~ B+
* Auto Fan Speed : 4.5V ~ B+
|
4. |
If the measured voltage is not within specification, substitute
with a known-good power mosfet and check for proper operation.
|
5. |
Replace the power mosfet if it is proved that there is a problem
with it.
|
Manifold Absolute Pressure Sensor (MAPS) Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Adjustment
How To Initialize
1.
Check that the glass has been installed.
A.
Finished height adjustment.
2.
...
Circuit Diagram
...