1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the blower resistor connector (A) and then remove the
blower resistor (B) after loosening the mounting screws.
|
3. |
Install in the reverse order of removal.
|
Front Wheel Speed Sensor Components
1. Front wheel speed sensor
2. Front wheel speed sensor connector
...
Installation
1.
Install in the reverse order of removal.
2.
Rotate the caliper piston and push the direction of the arrow.
3.
...
Component Location
1. EMS box assembly
(Engine control relay, Fuel pump relay,
Air conditioner compressor relay)
2. C/Fan 1 relay
3. C/Fan 2 relay
4. SSB 4(IG2) relay
5. Blower relay
...