Kia Forte: Intake Actuator Description - Blower - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Intake Actuator Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by the signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filter Replacement
1. Disconnect the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

See also:

On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    ...

Start/Stop Button Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center garnish [LH] (A). ...

Sealant
Items Specified sealant Control shaft assembly MS721-40 or MS721-38 ...

Copyright © www.kifomanual.com 2014-2024