Kia Forte: Intake Actuator Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Intake Actuator Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
|
| 3. |
Disconnect the connector (A) and then remove the intake actuator
(B) after loosening the mounting screws.
|
| 4. |
Install in the reverse order of removal.
|
Intake Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuato ...
Controller
...
See also:
Removal
Handle the sensor with care.
1.
Remove the tire.
(Refer to Tire/Wheels - "Tire& ...
Tail Gate Weatherstrip Replacement
(5Door)
1.
Remove the tail gate weatherstrip (A).
...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Copyright © www.kifomanual.com 2014-2024