Kia Forte: Heater & A/C Control Unit (DATC) Replacement - Controller - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Heater & A/C Control Unit (DATC) Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Controller / Heater & A/C Control Unit (DATC) Replacement

1.
Remove the audio unit.
(Refer to Body Electrical System - "Audio Unit")
2.
After loosening the mounting screws, remove the A/C & heater controller (A).

3.
Disconnect the A/C & heater controller connector (A).

4.
Install in the reverse order of removal.
Heater & A/C Control Unit (DATC) Self Diagnosis
1. Self-diagnosis process 2. How to read self-diagnostic code After the display panel blinks three times every 0.5 second, the ...

See also:

Installation
1. Install in the reverse order of removal.    Apply the specified grease to ...

Steering Gear box Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Active ECO operation
Active ECO helps improve fuel efficiency by controlling the engine and transaxle. But fuel-efficiency can be affected by the driver's driving habits and road conditions. When the Active E ...

Copyright © www.kifomanual.com 2014-2024